澳洲8开奖最快
CoverTec is a US manufacturer and distributor of floor coatings, floor cleaners and waterproofing products. CoverTec products are used primarily in flooring applications, roof and wall waterproofing and for industrial and commercial maintenance.
Significant cost savings can be achieved in floor maintenance, by using tough, professional grade floor sealers instead of conventional floor finishes available from the big box stores. The savings in maintenance labor costs can be over 40% depending on how much traffic the floor takes and the frequency of cleaning. Further cost and environmental savings come from the elimination of floor stripping and the use of harsh cleaning chemicals in the maintenance process.
The problem with conventional floor finishes is that they contain softer acrylic or latex particles and surfactants which trap dirt and chemicals in the finish surface. They have little or no chemical resistance. They require daily cleaning and weekly buffing to maintain their shine and clean appearance. For outside use lower quality products burn off quickly in the sun and lose their shine and protection value
We have developed low maintenance floor sealer that are extremely durable, oil and stain resistant Oil and dirt sits on the surface rather than being trapped in it. The surface becomes highly scuff and scratch resistant. Finish floors are easily cleaned and maintain with just regular wet mopping or auto scrubbing. Our products are extremely UV resistant and when used outside do not yellow, keeping their look and physical properties for many years. The bottom line is that they last longer and they are easier to clean.
Concrete Floors and Slabs
Ceramic Tile and Grout
Natural Stone and Tile
Vinyl (VCT) Resilient Flooring 
Brick and Concrete Pavers
Wooden Floors and DecksOther benefits of a good low maintenance sealer include increase slip resistance, high gloss, satin and matte options, very low odor and VOC, the elimination of burnishing dust and stripping chemicals in the maintenance process and the sealing system should be eligible for LEED credits.
Cleaning the surface thoroughly is a critical first step for any coating or sealing project. However removing oils, grease, wax, fatty acids and other contaminants, is not easy! Even grinding and shot blasting without cleaning, will only push contaminate like oil and grease deeper into porous substrates. Regular degreasers just smear and spread oil over a wider surface area, leaving a residue that is just as much a bond breaker as the original contaminates.
At CoverTec we focus on the best cleaning methods and products, for the coating process. We give careful consideration to the porosity of the substrates, how long it’s been exposed and the type and nature of the contamination.
It is very important to clean deep into substrate to prevent oil bleed back. Similarly when cleaning porous grout the cleaner must penetrate into the subsurface of the grout and neutralizeodor causing bacteria. Mold and mildew on roof or outside patio tile can only be effectively be removed by attacking the roots deep into substrate and not just on the surface. CoverTec coating expertise is backed by an extensive knowledge of substrate cleaning issues and surface preparation challenges. We have developed a group of surface cleaning products specific to substrate types and the nature of contamination. These products have proven track record in tough applications and environments. CoverClean substrate cleaners address the following key contamination issues
- Oil contaminated concrete
- Mastic reside
- Hard tile floors
- Grout and Tile floors
- Mold and Mildew
CoverTec specializes in floor safety. We have found that the two most effective ways to improve floor safety are firstly use the right type of floor cleaner and secondly, increase the traction on the floor.
Believe or not one of the biggest culprit behind the slippery floor issue is the cleaner itself. Furthermore alkaline cleaners are the biggest of those problems. They are used for their degreasing/cleaning ability, but they leave behind a residue that when it gets wet, it becomes extremely slippery. Add to that cross contamination of oil or grease from the kitchen or workshop and you have a bad combination and a dangerous situation.
Our CoverClean microbial products are traction enhancers that are incredibly effective on floors. CoverClean is completely alkaline free, and leaves behind no residue. The microbial action emulsifies and removes grease, oil and other contaminates from the microscopic pores in the flooring surface. Once the oil or grease has been consumed, any remaining dirt can easily be rinsed away, leaving the floor residue free.
CoverClean HC is a very green cleaning process, cleaning without pollution. The product has no VOC’s is Non Hazardous, Non Flammable and there are no restrictions on the surfaces it can be used on.
Changing or modifying walking surfaces is the next level of preventing slip and falls. Surface coating the concrete with an anti-slip product, can further improve safety and reduce risk of falling. However, it is critical to remember that anti-slip flooring requires good housekeeping as much as any other flooring.
CoverGrip anti-slip floor treatment is designed to give coefficient of friction (grip, or traction) levels that are safer in wet or dry conditions. CoverGrip is manufactured from recycled eye glass lens which are ground into fine granules. Eye Glass Lens is a hard wearing polycarbonate plastic which is very tough, but light weight so it blends easily into our coatings. It is virtually invisible to the naked eye when used in our clear coatings and sealers.
Products containing CoverGrip are classified as a High Traction, High Slip Resistance flooring systems, exceeding normal finished concrete or ceramic tile (wet or dry) and meeting and exceeding ADA standards. Our sealers and coating product has been independently tested and have a Wet SCOF of > 0.60 for wet walkway surfaces. When it comes to improving floor traction CoverGrip provides a cost effective solution for dealing with slippery floor conditions.
Any exposed porous surface such a concrete, brick or natural stone is susceptible to oil contamination, staining and discoloration. This can come from water, oil, organic and food based substances. Those charge with keeping these surfaces clean and pristine often turn to clear sealers to provide protection and reduce maintenance costs. However when it comes to oil and stain resistance not all sealers are created equal. Many types of sealers provide a gloss barrier but have limited chemical resistance. These sealers are effective in sealing out water but do not protect against oil based stains from petroleum products like brake fluid and cleaning solvents or from fat grease.
Our products utilizing fluoropolymer resins and highly cross linked waterborne polyurethane offering superior stain resistance properties compared to other treatments and are fast becoming the next generation of surface protectors. With our sealers you get superior, long-lasting oil and stain resistance. The products can be used on any interior or exterior concrete or masonry surfaces exposed to water, oil or other organic substances that are susceptible to staining or discoloration.
CoverTec sealers will not only provide improved chemical and gasoline/oil resistance, but it will also prevent dusting, spalling and inhibit efflorescence. Clean-uptime is reduced and simplified since dirt, grease, oil and chemicals that normally soak into the concrete are easily removed from the sealer.
Our sealers not only offer protection for concrete surfaces, but it can also protect ceramic tile and grout, natural stone and masonry surfaces. Our products are an ideal application for commercial and industrial areas where maximum oil and chemical protection is desired.
Significant cost savings can be achieved in floor maintenance, by using tough, professional grade floor sealers instead of conventional floor finishes available from the big box stores. The savings in maintenance labor costs can be over 40% depending on how much traffic the floor takes and the frequency of cleaning. Further cost and environmental savings come from the elimination of floor stripping and the use of harsh cleaning chemicals in the maintenance process.
The problem with conventional floor finishes is that they contain softer acrylic or latex particles and surfactants which trap dirt and chemicals in the finish surface. They have little or no chemical resistance. They require daily cleaning and weekly buffing to maintain their shine and clean appearance. For outside use lower quality products burn off quickly in the sun and lose their shine and protection value.
We have developed low maintenance floor sealer that are extremely durable, oil and stain resistant Oil and dirt sits on the surface rather than being trapped in it. The surface becomes highly scuff and scratch resistant. Finish floors are easily cleaned and maintain with just regular wet mopping or auto scrubbing. Our products are extremely UV resistant and when used outside do not yellow, keeping their look and physical properties for many years. The bottom line is that they last longer and they are easier to clean.
- Concrete floors and slabs
- Ceramic Tile and Grout
- Natural Stone and Tile
- Vinyl (VCT) resilient flooring
- Brick and Concrete Pavers
- Wooden floors and decks
Other benefits of a good low maintenance sealer include increase slip resistance, high gloss, satin and matte options, very low odor and VOC, the elimination of burnishing dust and stripping chemicals in the maintenance process and the sealing system should be eligible for LEED credits.
Cleaning the surface thoroughly is a critical first step for any coating or sealing project. However removing oils, grease, wax, fatty acids and other contaminants, is not easy! Even grinding and shot blasting without cleaning, will only push contaminate like oil and grease deeper into porous substrates. Regular degreasers just smear and spread oil over a wider surface area, leaving a residue that is just as much a bond breaker as the original contaminates.
At CoverTec we focus on the best cleaning methods and products, for the coating process. We give careful consideration to the porosity of the substrates, how long it’s been exposed and the type and nature of the contamination.
It is very important to clean deep into substrate to prevent oil bleed back. Similarly when cleaning porous grout the cleaner must penetrate into the subsurface of the grout and neutralize odor causing bacteria. Mold and mildew on roof or outside patio tile can only be effectively be removed by attacking the roots deep into substrate and not just on the surface. CoverTec coating expertise is backed by an extensive knowledge of substrate cleaning issues and surface preparation challenges. We have developed a group of surface cleaning products specific to substrate types and the nature of contamination. These products have proven track record in tough applications and environments. CoverClean substrate cleaners address the following key contamination issues
- Oil contaminated concrete
- Mastic reside
- Hard tile floors
- Grout and Tile floors
- Mold and Mildew
Firstly use the right type of floor cleaner and secondly, increase the traction on the floor.
Believe or not one of the biggest culprit behind the slippery floor issue is the cleaner itself. Furthermore alkaline cleaners are the biggest of those problems. They are used for their degreasing/cleaning ability, but they leave behind a residue that when it gets wet, it becomes extremely slippery. Add to that cross contamination of oil or grease from the kitchen or workshop and you have a bad combination and a dangerous situation.
Our CoverClean microbial products are traction enhancers that are incredibly effective on floors. CoverClean is completely alkaline free, and leaves behind no residue. The microbial action emulsifies and removes grease, oil and other contaminates from the microscopic pores in the flooring surface. Once the oil or grease has been consumed, any remaining dirt can easily be rinsed away, leaving the floor residue free.
CoverClean HC is a very green cleaning process, cleaning without pollution. The product has no VOC’s is Non Hazardous, Non Flammable and there are no restrictions on the surfaces it can be used on.
Changing or modifying walking surfaces is the next level of preventing slip and falls. Surface coating the concrete with an anti-slip product, can further improve safety and reduce risk of falling. However, it is critical to remember that anti-slip flooring requires good housekeeping as much as any other flooring.
CoverGrip anti-slip floor treatment is designed to give coefficient of friction (grip, or traction) levels that are safer in wet or dry conditions. CoverGrip is manufactured from recycled eye glass lens which are ground into fine granules. Eye Glass Lens is a hard wearing polycarbonate plastic which is very tough, but light weight so it blends easily into our coatings. It is virtually invisible to the naked eye when used in our clear coatings and sealers.
Products containing CoverGrip are classified as a High Traction, High Slip Resistance flooring systems, exceeding normal finished concrete or ceramic tile (wet or dry) and meeting and exceeding ADA standards. Our sealers and coating product has been independently tested and have a Wet SCOF of > 0.60 for wet walkway surfaces. When it comes to improving floor traction CoverGrip provides a cost effective solution for dealing with slippery floor conditions.
Any exposed porous surface such a concrete, brick or natural stone is susceptible to oil contamination, staining and discoloration. This can come from water, oil, organic and food based substances. Those charge with keeping these surfaces clean and pristine often turn to clear sealers to provide protection and reduce maintenance costs. However when it comes to oil and stain resistance not all sealers are created equal. Many types of sealers provide a gloss barrier but have limited chemical resistance. These sealers are effective in sealing out water but do not protect against oil based stains from petroleum products like brake fluid and cleaning solvents or from fat grease.
Our products utilizing fluoropolymer resins and highly cross linked waterborne polyurethane offering superior stain resistance properties compared to other treatments and are fast becoming the next generation of surface protectors. With our sealers you get superior, long-lasting oil and stain resistance. The products can be used on any interior or exterior concrete or masonry surfaces exposed to water, oil or other organic substances that are susceptible to staining or discoloration.
CoverTec sealers will not only provide improved chemical and gasoline/oil resistance, but it will also prevent dusting, spalling and inhibit efflorescence. Clean-uptime is reduced and simplified since dirt, grease, oil and chemicals that normally soak into the concrete are easily removed from the sealer.
Our sealers not only offer protection for concrete surfaces, but it can also protect ceramic tile and grout, natural stone and masonry surfaces. Our products are an ideal application for commercial and industrial areas where maximum oil and chemical protection is desired.
